CTEK Battery Chargers & Conditioners

The CTEK MULTI XS 25000 is powerful for batteries that require rapid charging: in your RV, boat, or workshop. The charger automatically adjusts the charge to the battery's temperature. The CTEK MULTI XS 25000 has the same handy Supply-Mode as the CTEK MULTI XS 7000. The CTEK MULTI XS 25000 features built-in functions that analyse the status of your battery. Maintenance charging uniquely combines battery requirements of high capacity and long life. The CTEK MULTI XS 25000 is delivered with a battery lead with clamps, colour coded for easy +/- identification. The charger also has a sensor cable located together with the battery leads. The unit automatically adjusts the charge voltage if the temperature deviates from +25°C. Higher temperatures lower the voltage and lower temperatures raise the voltage. The sensor cable can be extended or shortened without affecting functionality. The charger must be fitted with the top or long side facing up to be approved for outdoor use. Lead Lengths From mains plug to unit = 1.7m From unit to connectors = 1.5m

Auto: Fully automatic for optimal charging 12V: For all lead-acid batteries Step 7: Fully charged battery Step 8: Maintenance charging COLD/AGM: Charging in cold conditions and AGM batteries RECOND: Recondition of deeply discharged batteries Technical Specification: Model number: 1049 Volt: 12V Rated Voltage: AC 220–240VAC, 50–60Hz Charging voltage: SMALL, NORMAL: 14.4V, COLD/AGM: 14.7V, RECOND: 15.8V Min battery voltage: 2.0V Charging current: 5A max Current, mains: 0.65A rms (at full charging current) Back current drain: Ripple: Ambient temperature: -20°C to +50°C, output power is reduced automatically at high temperatures Charger type: 8 step, fully automatic charging cycle Battery types: All types of 12V lead-acid batteries (WET, MF, Ca/Ca, AGM and GEL) Battery capacity: 1.2–110Ah up to 160Ah for maintenance Dimensions: 168 x 65 x 38mm (L x W x H) Insulation class: IP65 Weight: 0.6kg

The MXS 3.6 is a proven and reliable charger produced by teh market leading Swedish company CTEK. It offers important features such as desulphation, maintenance charging and cold mode for optimised charging during cold winter days. It is also suitable for charging demanding AGM batteries (i.e. Optima). It is the ideal charger for those looking for quality and simple 'connect and forget' charging. The MXS 3.6 is a fully automatic 4-step charger that charges 12V batteries from 7–75 Ah and is suitable for maintenance charging up to 120Ah. The MXS 3.6 is IP 65 classified (splash and dust proof) and delivers selectable 0.8A or 3.6A. It is designed to protect vehicle electronics and is non-sparking-, reverse polarity protected and short-circuit proof. The MXS 3.6 is delivered with a 5-year warranty.

The CTEK XC 800 is a full-featured 6V charger in mini format. It gives the batteries of your vintage vehicle a new life. CTEK XC 800 charges small batteries that hold as little as 1 Ah, up to the biggest tractor batteries. The CTEK XC 800 is delivered with two different battery leads, one with clamps and one with eyelet terminals, all colour coded for easy +/- identification. If the battery is difficult to access, the lead with eyelet terminals can be mounted to the battery, and the quick connectors are located so that it is easily reached for charging. You can also purchase additional leads allowing you to have one lead with eyelet terminals fixed to all your vehicles with batteries that are difficult to get at, and charge them simply from the same charger. Lead Lengths From mains plug to unit = 1.7m From unit to connectors = 1.5m

New in Feb. 2009 - CTEK Comfort Indicator with a 3m extension so you can run it into the car to check the battery condition at a glance. Simply connect the twin 8.4mm eyelets to the battery terminal and one of 3 LEDs will light to tell you if the battery is fine (green), could do with a charge soon (amber) or needs a charge now (red). Very handy indeed ! 'Easy way to tell if your battery needs a charge. Discreet and well made' said AutoExpress (12/2/09)

New in Feb. 2009 - CTEK Comfort Indicator. Simply connect the twin crocodile clips to the battery terminal and one of 3 LEDs will light to tell you if the battery is fine (green), could do with a charge soon (amber) or needs a charge now (red). Very handy indeed ! 'Easy way to tell if your battery needs a charge. Discreet and well made' said AutoExpress (12/2/09)

New in Feb. 2009 - CTEK Comfort Indicator. Simply connect the 8.4mm eyelets to the battery terminal and one of 3 LEDs will light to tell you if the battery is fine (green), could do with a charge soon (amber) or needs a charge now (red). Very handy indeed ! Due in stock c. 27 Feb 2009 - advance orders taken. 'Easy way to tell if your battery needs a charge. Discreet and well made' said AutoExpress (12/2/09)

The CTEK Cigarette Plug Connection Lead is a more convenient way to connect the CTEK XC 800, CTEK XS 800 & CTEK MULTI XS 3600 through the interior of your vehicle instead of accessing the battery compartment, which for some can be both time consuming and awkward in itself.

The CTEK Cigarette Plug Connection Lead is a more convenient way to connect the CTEK XC 800, CTEK XS 800, CTEK MULTI XS 3600 and CTEK MULTI XS 7000 through the interior of your vehicle instead of accessing the battery compartment, which for some can be both time consuming and awkward in itself. This is the new Comfort Connect version which fits CTEKs with the black and orange connector only.

The CTEK Eyelet Terminal Connection Lead is a more convenient way to connect the CTEK XC 800, CTEK XS 800 & CTEK MULTI XS 3600 making a more permanent connection to your battery pole, which for some can be both time consuming and awkward in itself. By connecting the Eyelet to the thread of the clamping system around the battery poles, you are then presented with a plug to simple connect and then disconnect the charger when necessary.