Order Online or Call 01780 65 40 65
Feefo Platinum Trusted Service

The complete Race Glaze Car Care Range (Race Glaze)

'Admiration without effort' is the Race Glaze motto - quality car and bike care products, proven since 1994, which are rapidly gaining a new and wider audience. The launch of new Signature Series waxes in 2008 heralded a period of continual range expansion, with Concours winners every week it seemed, and renewed interest in the wider range, beloved by classic and sports car owners, detailers and dealers over the years. Our products are bang up to date, made in the UK for us, with new Nano and Ceramic products available from 2016. Race Glaze supply many premium car sales companies and top end valeters/detailers, as well as enthusiasts whom we have served almost since our foundation. In fact, our Founder is still a customer. This is our home website, with distributors worldwide.
148 products
Brand Select Brand
Sort by Sort By
Full Vehicle Detailing
In Stock
Usually ships in 24 Hours

Our Price: £350.00 (inc VAT)
How would you like us to send a Race Glaze Authorised Detailer to your home or business premises to apply all his knowledge and vast range of products to bring your car back to tip top condition ? Would you like us to spend up to 4 hours machine polishing out almost every scratch and swirl to leave richly coloured paint, protected with 2 coats of Signature 55 wax ? And of course pay equal attention to all other exterior surfaces and also the interior, the bit you see the most ? The service in detail: •Wash exterior, engine bay, under arches and door shuts, then clean and dry the wheels including inside. Apply wheel wax. •Clay bar the entire car including windscreen, wipers and glass to remove paint overspray, industrial and environmental contaminants, leaving a glass smooth surface. •Pre-Wax Cleanse (non-abrasive) is applied to the paintwork to gently cleanse and nourish the paint with natural oils . Tar, tree sap and old waxes are completely removed. •Finally 2 coats of Signature 55 Carnauba Wax is then applied to the whole car to create an incredible swirl-free gloss finish and put a long lasting protective shell on the paint surface. We also coat your wheels with Wax, to protect them and ease cleaning brake dust off. •The interior will get a full vacuum, all vents, grilles and audio dusted out with detailers brushes and carpets will be cleaned by hand. We’ll clean and dress the dash and trim with vinyl or leather products as appropriate, then clean and recondition your leather with appropriate products. Once your car is in pristine fettle, your detailer will advise on relevant products you can purchase from us to keep on top of it, or reorder a top up visit 3-6 months later. Geographical Coverage: this service covers most of mainland England, comprising the main population centres and areas between. We do not cover Wales or Scotland but do cover Northern Ireland and Dublin area. Please confirm with us if you live in a remote area prior to booking. Vehicle restrictions: This service is for cars in reasonable condition for a standard correction. Vehicles in poor condition e.g. deeply scratched, dented, rusty, abused, barn finds or anything we consider unreasonable (and we are reasonable people!) and which therefore require excessive work, will be charged extra either by prior agreement or on the day. 4x4s and limousines will require an additional charge by agreement. Our requirements: Somewhere dry and spacious if weather is poor or the booking is outside the best weather periods. Access to power and water. Hard standing preferred. Additional services: Soft Tops - cleaning and reconditioning/colouring undertaken Technical note: This is an 'enhancement' detail, whereby we would machine polish the entire vehicle within the constraints of 1 days work and the condition of the vehicle. It is not a 'full correction' detail as that would take 2 days of machining alone, and acheiving a totally scratch-free finish is almost impossible. We are very happy to inspect a vehicle for such a service and quote accordingly.
Learn More
Customer Rating Average Customer Rating: 5 out of 5  for the Full Vehicle Detailing

Race Glaze Water Filter 25 Litre
In Stock
Usually ships in 24 Hours

Our Price: £299.99 (inc VAT)
Larger 25 Litre resin capacity 0 PPM in-line water filter, ideal for professionals and serious detailers with collections of cars. Works in exactly the same way as the 7 litre version, should typically produce approx. 1400 litres of pure filtered water which will leave NO water spots on your vehicle, no matter what colour it is or how hot it is when washing. This prevents adding drying marks or swirls, water spots etc. And saves time. Water output figures will vary with your local water hardness, most people will achieve better results - this is based on medium hard Hertfordshire water. Suitable for use with a pressure washer but ensure you buy the £1 Mesh Exit Filter. Complete (ready to use) with 25 Litre of pure first grade MB115 ion exchange resin producing drinking water quality filtered water. Manufactured under ISO 9001 and ISO 14001 certification in Belgium - not India or China. It is illustrated next to the smaller, standard 7 Litre filter, and stands approx. 1 metre tall. It will need securing to a wall to prevent it falling over, though our Water Filter brackets do not fit this unit. We recommend that a final rinse is performed at half mains pressure, just sufficient to create a wave of water over the vehicle, and should be able to be completed in around 45 seconds for a standard family car, little over a minute for a 4x4. This is based on our own usage over the last 4 years. Our resin vessels are made in Europe (many are not) and comprise a PE inner shell and wound fibreglass outer. These are high quality, strong units with best quality fittings and top grade resin. NOTE ON SHIPPING OUTSIDE MAINLAND UK These are heavy items and our low standard carriage rate is designed to keep costs down for customers of our standard size car care products. Shipping for these filters outside mainland England, Scotland and Wales is simply too much for us to absorb and unfortunately has to passed onto customers. Shipping to Northern Ireland for instance, for a filter alone is £25 in total. Please contact us if you live outside mainland UK. WARRANTY The product is warranted free of manufacturing defects for 12 months, but the resin media is a consumable and not covered. If the vessel is dropped or falls, warranty on the cap and body is void.
Learn More
Customer Rating Average Customer Rating: 5 out of 5  for the Race Glaze Water Filter 25 Litre

Black Label Concours Wax
In Stock
Usually ships in 24 Hours

Our Price: £285.00 (inc VAT)
Black Labels' unmistakeable padded black box reveals a handsome and weighty solid billet aluminium jar, bespoke manufactured for their flagship product. Feel the weight and its luxurious silken anodised finish – it really does feel the part. Turn the masculine lid, reminiscent of a Ferrari filler cap, to reveal 300ml of smooth, white Grade-1 refined Carnauba and oil rich soft wax. With over 66% Carnauba content by volume, compare its technical spec, which is silicone-free too, with other waxes costing hundreds or even thousands of pounds more. Each jar, which is refillable by Race Glaze at £200, should coat 40-50 cars with a deeply reflective, nourishing and warm glow, leaving it looking literally wet to the touch. Its protective capability, tight water beading and longevity are assured. Its careful formulation allows a huge proportion of a car to be waxed before effortless buffing off without residues. Its ease of use and results will leave you stunned. Each jar carries a watermarked Certificate of Authenticity, your guarantee of the finest ingredients skilfully blended and poured by hand in limited quantities.
Learn More
Customer Rating Average Customer Rating: 5 out of 5  for the Black Label Concours Wax

Silver silky reveal cover - 4x4 size
In Stock
Usually ships in 24 Hours

RRP: £249.99
Our Price: £210.00 (inc VAT)
You Save: £39.99 (16%)
Large silky silver reveal cover for all 4x4 cars. Perfect for customer handovers or new product launches - dustproof too. Hand made in England, from stock, large quantities can be made in only a few days. Suitable for Porsche Cayenne, Volvo XC90, Land Rover Defender/Freelander, Range Rover Sport, BMW X5 etc. Logos can be added from £30. Made from machine washable polyester.
Learn More
Black silky reveal cover - 4x4 size
In Stock
Usually ships in 24 Hours

RRP: £249.99
Our Price: £210.00 (inc VAT)
You Save: £39.99 (16%)
Large silky black reveal cover for all 4x4 cars. Perfect for customer handovers or new product launches - dustproof too. Hand made in England, from stock, large quantities can be made in only a few days. Suitable for Porsche Cayenne, Volvo XC90, Land Rover Defender/Freelander, Range Rover Sport, BMW X5 etc. Logos can be added from £30. Made from machine washable polyester.
Learn More
Water Filter 14 litre (Northern Ireland)
In Stock
Usually ships in 24 Hours

Our Price: £205.00 (inc VAT)
Please select this item if your delivery address is in one of the zones shown on the image. Select Standard 1-2 day shipping at Checkout. If you want any additional items such as spare resin, you can select the standard priced unit as long as you have one of these NI costed units in your order. Delivery is 2 days with DPD. This will save us contacting you for extra shipping payments if you select the UK Mainland rate. Thank you for your cooperation. Suitable for use with a pressure washer but ensure you buy the £1 Mesh Exit Filter.
Learn More
Customer Rating Average Customer Rating: 5 out of 5  for the Water Filter 14 litre (Northern Ireland)

Black Label refill
In Stock
Usually ships in 24 Hours

Our Price: £200.00 (inc VAT)
If you already own Black Label you will note the sticker that says that we will refill your original jar. So when you need more wax, just make your order here and package up your jar securely and return it to our premises. We will refill and return your jar within typically 5 working days. For overseas please contact your Reseller or us as some carriage costs may need to be agreed.
Learn More
Race Glaze Water Filter 14 Litre
In Stock
Usually ships in 24 Hours

Our Price: £189.99 (inc VAT)
New, taller and 30% more efficient water filter to make your car washing easier - no white water spots and no need to dry the car. Saves time and reduces marring and drying risks. See video here: https://youtu.be/GCIaB-i91Tg This new 14L filter produces around 1,105 litres of pure zero parts per million filtered rinse water before the resin needs replacement (buy 2 x 7L refill bags). Our smaller, 7L vessel produces 415L, so this new, larger unit is significantly more economical. In comparison to other, 'window cleaner suppliers' units, the combination of our resin and taller filter makes this more economical. See our detailed explanation why below. NOTE: this is based on Harpenden town water at 420ppm - some of the worst in the UK. Most customers will achieve significantly greater volume of pure what than this. Suitable for use with a pressure washer but ensure you buy the £1 Mesh Exit Filter. Note that as it is tall and slightly top heavy, you will need to secure it upright - we supply wall brackets which will achieve this. It is illustrated with our 7 Litre filter. The use of “mixed resin bed” water filters to remove all of the dissolved impurities has long been established in industries such as Pharmaceuticals, electronics and metal surface treatment. More recently, large scale car wash systems (such as tunnel washes), window cleaners and horticulturalists have also been using the products to produce water free from impurities. Note: filled with 14L of resin and ready to use. For the car wash and window cleaning industry, the advantages are that using water which contains no dissolved impurities allows the user to leave the car or window wet, to dry naturally and with no trace of water marks. The use of these filters is not simply a case of just connecting up a unit and running water through it though. The size and shape of the unit has a big impact on the maximum flow rate of the water through the unit, the volume of water that can be treated before the resin needs changing and also the quality of the water produced. The performance of a water filter comes down to contact time between the water and the mixed bed resin within the unit. The longer the contact time, the better the quality of the water will be, as the resin has longer to remove the dissolved ions (or impurities). The best way to achieve long contact time is to have a good amount of resin in relation to the flow rate of the water. This is represented by what is known as the 40 bed volumes per hour rule. That is the bed volume of resin in the unit multiplied by 40 which gives the optimum flow rate of water for that sized unit per hour. So a unit with 6 litres of resin in should (theoretically) be able to treat up to 240Lts per hour. In real terms this rule is rarely adhered to however, but does give a good guideline to the effectiveness if individual units. Unfortunately the story doesn’t end there as the “aspect ratio” of the filter also needs to be taken into account. This is basically the height of the filter divided by the diameter. The bigger the aspect ratio (i.e. the taller and thinner the unit) the better the performance will be. This is because the water has a greater depth of resin to pass through and therefore the resin has a greater chance of removing all of the impurities. A narrower diameter filter will also ensure that the water is distributed across the whole cross sectional area of the filter, thereby using all the resin bed to its maximum capacity. The standard Race Glaze 7L filter is a 6” diameter by 18” high vessel, which has an aspect ratio of 3. The vast majority of window cleaning filter products are based either on 8”diameter by 17” high vessels which only have an aspect ratio of 2.1 or a 7” by 13” vessels which only has an aspect ratio of 1.9. As such these units can suffer with the external edges of the resin not being fully utilised, and therefore giving lower capacity than the volume of resin would suggest. In the window cleaning industry this isn’t so much of a problem as the filters are generally used as the final stage of a multiple stage purification process. As such the water is already quite pure before it gets to these filters, so any shortfall in efficiency isn’t really noticed as they have such a low mineral load anyway. With mains water however the load on the resin is much higher, with the mineral content of the water often being tens of or even a hundred of times higher than the water from the window cleaning purification process. The new Race Glaze 14L filter is a 6” diameter by 35” high vessel having an aspect ratio of 5.8, far in excess of anything else available on the market. Coupled with a large resin capacity of 14 litres this filter now has unrivalled capacity for those who like to use a lot of water when rinsing their car. The tested capacity figures also bear this theory out. We filled 3 separate vessels with the same mixed bed resin (Purolite MB400) and tested the overall capacity at the same standard flow rate (6 litres per minute) using Harpenden towns mains water at a TDS of 420. The volume of water produced before the quality reached 10ppm (still good enough to no give spots, but a sign that the resin bed is beginning to fail from its initial 0ppm reading) were as follows:- • Race Glaze 6” by 18” 7L filter gave 415 litres of water from 7 litres of resin. • Window Cleaning type 8” by 17” filter gave 480 litres of water from 10 litres of resin. • Race Glaze 6” by 35” 14L filter gave 1105 litres of water from 14 litres of resin. You can see from these figures that by simply using a taller thinner filter you significantly increase the capacity of the unit from 59 litres of water per litre of resin with the 6x18 to 79 litres of water per litre of resin with the 6x35. So what’s the downside then? The reason the window cleaning industry tend to use 8x17 vessels is that they tend to be a bit dumpier and if stored in a moving van (as they generally are) they will be more stable than a taller thinner unit. Clearly a 6” diameter by 35” high filter is going to be top heavy and more likely to fall over, so needs to be secured, but if sited in your garage then securing the filter shouldn’t be a problem. We do offer a heavy duty wall bracket which will do the job. The only other downside is that the old trick of “backwashing” the filter probably won’t give you extra capacity as the filter has used all of its resin bed up by being efficient in the first place. The backwashing process (where the inlet and outlet connections are swapped over and water passed upwards through the filter) moves the resin bed around and re-classifies some of the un-used resin back to the centre of the filter. As such best keep some spare resin to hand for when it finally fails. Other than that there isn’t one! Who wouldn’t want 30% more free pure water from their filter just by changing to a taller system? Note on most economical usage: We recommend that a final rinse is performed at half mains pressure, just sufficient to create a wave of water over the vehicle, and should be able to be completed in around 45 seconds for a standard family car, little over a minute for a 4x4. This is based on our own usage over the last 4 years. Our resin vessels are made in Europe (many are not) and comprise a PE inner shell and wound fibreglass outer. These are high quality, strong units with best quality fittings and top grade resin. WARRANTY The product is warranted free of manufacturing defects for 12 months, but the resin media is a consumable and not covered. If the vessel is dropped or falls, warranty on the cap and body is void.
Learn More
Customer Rating Average Customer Rating: 5 out of 5  for the Race Glaze Water Filter 14 Litre

Black silky Reveal cover - car size
In Stock
Usually ships in 24 Hours

RRP: £249.99
Our Price: £159.00 (inc VAT)
You Save: £90.99 (36%)
This is the silky draped cover that is slipped off to reveal your gleaming new model or customers car in all its glory ! Made from dense, non-transparent silky polyester satin material to drape over the car and heighten excitement, it will cover standard and executive sized saloons completely. Available in black or silver from stock as a standard size. Many other colours to order. Depending on the size of the vehicle the cover may drape on the floor but this is entirely normal. Silk Reveal Covers are not supplied with a logo as standard - talk to us about your logo requirements. We can do anything ! Colours: Black, Silver - ask us for others
Learn More
Water Filter Resin 25 Litres
In Stock
Usually ships in 24 Hours

Our Price: £150.00 (inc VAT)
Replacement MB115 water filter resin, large 25 litre sack. Fills approx 3.5 of our 7 litre resin vessels or a complete 25 L one. Manufactured under ISO 9001 and ISO 14001 certification. Store dry, no shelf life.
Learn More
Water Filter 7 litre (Northern Ireland)
In Stock
Usually ships in 24 Hours

Our Price: £115.00 (inc VAT)
Please select this item if your delivery address is in one of the zones shown on the image. Select Standard 1-2 day shipping at Checkout. If you want any additional items such as spare resin, you can select the standard priced unit as long as you have one of these NI costed units in your order. Delivery is 2 days with DPD. This will save us contacting you for extra shipping payments if you select the UK Mainland rate. Thank you for your cooperation.
Learn More
Refillable 0ppm Water Filter (7 litre)
In Stock
Usually ships in 24 Hours

Our Price: £99.99 (inc VAT)
We’ve all had to swiftly run round our cars to dry them before water spots form, which are very hard to remove and can badly affect paintwork. And try as you might, washing and drying will cause swirl marks and light surface scratching. See video here: https://youtu.be/GCIaB-i91Tg Suitable for use with a pressure washer but ensure you buy the £1 Mesh Exit Filter. Supplied ready to use with resin. Existing in-line water filters are either very expensive or have incredibly short lives, and can waste the casing, which is very environmentally unfriendly. For example, the AquaGleem filter is 2.5 litre capacity, typically retails at £55. That’s 54% more expensive than our unit costing you 38p per litre. The Race Glaze unit costs 25p per litre, as supplied with its first fill of mineral-absorbing resin,and only 10p per litre with subsequent refills ! NOTE: this is based on Harpenden town water at 420ppm - some of the worst in the UK. Most customers will achieve significantly greater volume of pure water than this. The new Race Glaze Maxi-Filter uses a durable 11 bar pressure tested fibreglass tank ready filled with 7 litres of premium A1 grade resin (note: some budget filters use sharps – broken reject resin, or are only part filled) and comes ready for you to add standard Hozelock-type connectors (not supplied but available on this website) to begin use immediately. Not made in China or India - made in Belgium, so quality and durability guaranteed. Mains water comes into the unit and is distributed out from the top strainer into the resin bed, falls under pressure and gravity down through the resin bed and as its only outlet is into the bottom strainer and up the pipe, comes through the resin bed to emerge on the outlet side as close to 0 parts per million (ppm) of dissolved solids as possible. Using a hosepipe to wash a car uses approx. 30 litres of water (AutoExpress 21/3/2012), a final rinse only a fraction of that – we estimate 5-7 litres at most. This is a breakthrough in filtered water product for car washing that is proving to be very popular. We recommend that a final rinse is performed at half mains pressure, just sufficient to create a wave of water over the vehicle, and should be able to be completed in around 45 seconds for a standard family car, little over a minute for a 4x4. This is based on our own usage over the last 4 years. Accessories: Water Hardness Meter so you can test the water to see when resin needs replacing, and replacement resin in 7 litre or 25 litre bags. Alternatively, simply send us a sample of your output water and we'll measure it for you and report by email. FREE service for our customers only. All our figures are based on a sensible typical UK hardness figure of 300ppm dissolved solids in Hertfordshire, giving 415 litres of water. You will get much more in softer water areas. OUR PRODUCT REVIEWS There are dozens of reviews of these products and every one is totally genuine. Customers love them ! The product really is that good. If we added all the good things said about them verbally and on Forums we'd have 3 times as many... We have carefully selected these taller vessels, in consultation with a water treatment industry veteran, as wider, dumpier (window cleaners) vessels have a lower efficiency and can’t extract the maximum capacity from the resin. This ends up costing you more money. In our tests, our 7L filter produced 59 litres water per litre of resin, over 20% more efficient than the window cleaner 10L unit which produced 48L per litre of resin. So if you're comparing units, add 20% to the price of the dumpy units. We strongly advise that you check your shed/garage for male adapters and hosepipe-end connectors prior to purchase - though you can buy them from us with your order. WILL WATER SOFTENERS DO THE SAME THING? Water Softeners change dissolved hardness into dissolved sodium bicarbonate which removes limescale. However, if you boil off the resultant water you will have a residue at the end of the process - which will be left on your car if you use softened water to wash it and let it dry in the sun. Our filter totally removes all dissolved solids and there will be nothing left on your car after sun drying. They are different process designed to do different things. Our resin vessels are made in Europe (many are not) and comprise a PE inner shell and wound fibreglass outer. These are high quality, strong units with best quality fittings and top grade resin. NOTE ON SHIPPING OUTSIDE MAINLAND UK These are heavy items and our low standard carriage rate is designed to keep costs down for customers of our standard size car care products. Shipping for these filters outside mainland delivery areas of England, Scotland and Wales is simply too much for us to absorb and unfortunately has to passed onto customers. Shipping to Northern Ireland for instance, for a filter alone is £15 and with extra resin, is £22 in total. Please contact us if you live outside mainland (lowland) UK - the zones where you know couriers charge more to deliver! WARRANTY The product is warranted free of manufacturing defects for 12 months, but the resin media is a consumable and not covered. If the vessel is dropped or falls, warranty on the cap and body is void.
Learn More
Customer Rating Average Customer Rating: 5 out of 5  for the Refillable 0ppm Water Filter (7 litre)



Your Viewing History

Recently Viewed Categories



 

Our Customers Say...

"Fantastic service! Ordered yesterday, received today. Thanks very much. "

Lin & Vic Jefford, Destiny Cycles, England, November 2010


Read More Comments


Race Glaze was established in 1994 to provide easy to use car care and detailing products which provide superb results. Our range has widened and we now offer other complementary branded products which meet our high standards. So from this new 2010 website you'll find Car Wax, Car Polish, Battery Chargers, Battery Conditioners for 6 volt, 12 volt, 24 volt applications, Tailor Made Car Covers, Universal Car Covers. We stock leading brands such as CTEK, Renovo, Mitsubishi, Hindsight, X-Dry and with dedicated advisors available to help, RaceGlaze makes shopping online for car and bike care products and accessories simple, fast and reliable.
Credit & Debit cards accepted at RaceGlaze: Visa, American Express, MasterCard, Maestro, Solo and Delta

Valid HTML 4.01 Transitional Valid CSS!