Replacement Water Filter Resin - 7 litre - Features
MB115 resin refill for our and other filters
Pure finest grade
Shipping to Northern Ireland - due to weight there is a supplement of £15 over our standard shipping rate
Replacement Water Filter Resin - 7 litre - Description
7 litre bag of top grade replacement resin for Race Glaze Maxi Water Filter. Guaranteed first grade, new, A1 grade MB115 resin, not fines or mis-shapes. Manufactured under ISO 9001 and ISO 14001 certification.
This is sufficient to replace the resin in your 7 litre filter as originally supplied. It is also exactly the same product. For 14 litre filters you will need 2 bags.
When your filtered water starts to leave spots then simply unscrew the top of your filter and dispose of the old resin in your waste bin, rinse out the filter and empty this replacement bag of resin in. Do not let resin fall down the tube, which you have to leave in situ in the centre of the filter - our Refilling Kits include a wide mouth funnel to prevent wastage/spillage, and a handy cap for this pipe.
Tap the filter on the ground a couple of times when refilling as this will enable resin to settle down, and you can fill it right to the top (just allow enough for the internal head to seat properly). You may have a little resin left over.
If the top is tight, smear a thin film of oil (olive, sunflower) around it to make it easier next time.
Costs of the filtered water once you get to replacement stage are of course 55% less than the batch created by the original new filter, at approx. 10p/litre.
Replacement resin does have a lifespan of around 2 years.
NOTE ON SHIPPING OUTSIDE MAINLAND UK This is a heavy item and our low standard carraige rate is designed to keep costs down for customers of our standard size car care products. Shipping for water filters and replacement resin outside mainland England, Scotland and Wales is simply too much for us to absorb and unfortunately has to passed onto customers. Shipping for a filter and extra resin to Northern Ireland for instance is £22 in total. For resin alone, £16 in total.
Customer Reviews of Replacement Water Filter Resin - 7 litre
More Customer Reviews of Replacement Water Filter Resin - 7 litre
Discovered the 0 ppm water filter October 2019 on Race Glaze after buying a black Mercedes, is the best thing I've bought by far for my weekly car clean Resin now needs replacing , called up and ordered at 10.15 on the Wednesday , arrived at 12.45 the next day , Great service , many thanks Greg
REFILLABLE WATER FILTER by Paul Brown, Runwell, 27 February 2016
SAW THIS ADVERTISED AND AFTER MUCH RESEARCH THOUGHT I WOULD GIVE IT A GO AFTER READING SOME REVIEWS TO BE HONEST DIDN'T THICK IT WOULD WORK BUT HOW WRONG I WAS AND ON A BLACK CAR FIRST TIME I USED IT IT WAS OK A BIT OF A LEARNING CURVE SO THE NEXT I USED IT ON A HOT SUNNY DAY AND I WAS AMAZED NO WATER MARKS AT ALL AND THE MORE YOU USE IT THE BETTER IT BECOMES BEEN USING IT FOR ALMOST A YEAR NOW AND ITS TIME TO REPLACE THE RESIN I WASH THE CAR AT LEAST 3 TIMES A MONTH WOULD HIGHLY RECCOMEND
Excellent by Philip Sage, Bedford, 08 February 2016
Originally purchased for my 40 year old classic, the product now gets used for my partner's car and even for my work van. The ultimate test was washing my car on a very hot June day, rinsing with the 0ppm filtered water without drying it, then driving 55 miles to London to collect the bride on her big day. Yes, I also use my classic as a wedding car. Close inspection revealed only one solitary water mark on the rear chrome bumper, where water had drained from the boot rubber. Other than that, the body, glass and chrome were sparkling and pristine. Well done Raceglaze.
Resin re-fill by Stephen Millard, , 24 February 2015
Excellent product, does what it says and leaves no water spots.
I do have a slight problem using the filter though. Its difficult to re-fill, opening the top and removing the old resin is OK (hard to unscrew the top fitting if you did it up too tight last time though), but getting the new resin in and then putting back the pipe and filter that go down through down to the bottom is very hard and I have not yet mastered an effective method!! [Race Glaze are about to offer a wide necked funnel and cap for the pipe]
Having said that it makes washing a dark blue car in the sunshine a piece of cake
Resin Filter by Pete Garratt, Hertfordshire, 24 November 2014
I live in a hard water area. Typically, water neat from the tap reads 700ppm+ on my Total Disolved Solids meter. Use of this filter reduces that to 3-4ppm when fresh. This makes drying my vehicle really easy, especially during the warmer months. It also makes ironing easier as well.
I've had the filter about 6 months and it still achieves about 70ppm TDS, which - judging by drying performance - I think is still pretty good.
Write Your Own Review For The Replacement Water Filter Resin - 7 litre
Race Glaze was established in 1994 to provide easy to use car care and detailing products which provide superb results. Our range has widened and we now offer other complementary branded products which meet our high standards. So from this new 2010 website you'll find Car Wax, Car Polish, Battery Chargers, Battery Conditioners for 6 volt, 12 volt, 24 volt applications, Tailor Made Car Covers, Universal Car Covers. We stock leading brands such as CTEK, Renovo, Mitsubishi, Hindsight, X-Dry and with dedicated advisors available to help, RaceGlaze makes shopping online for car and bike care products and accessories simple, fast and reliable.